You are here:

Duplo Yellow Brick 2 x 4 x 2 with Rounded Ends with Eyes (a little wonky) (6448 / 81981)

Duplo Oval/eyes New
More Colors
Design ID81981
Item No81981
BOID652367-93
Year1993 - 2009
2 x 4 x 2 1.3" x 2.5" x 1.7"
In 15 Wishlists
18 Available from €0.11
Add to Wishlist Buy
Yellow
Stores
Condition All (9) Used (Good) (7) Used (Acceptable) (2)
Store Location
Min Quantity
ConditionNameIn StockPricePrice +
Shipping		Store
Used
(Good)		Yellow Brick 2 x 4 x 2 with Rounded Ends with Eyes (a little wonky)2€0.142€17.80United States Brixalotl (2066)
Shipping   €17.65
Minimum Order  €2.36
Used
(Good)		Yellow Brick 2 x 4 x 2 with Rounded Ends with Eyes (a little wonky)4€0.22 N/AGermany versibrix (149)
Request a Shipping Quote
Minimum Order  €5.00
Used
(Acceptable)		Yellow Brick 2 x 4 x 2 with Rounded Ends with Eyes (a little wonky)
scratched
1€0.24 €24.68United States JLRSextra (250)
Shipping   €24.44
Used
(Good)		Yellow Brick 2 x 4 x 2 with Rounded Ends with Eyes (a little wonky)1€0.248€19.74United States Bonfire Bricks (1299)
Shipping   €19.49
Used
(Good)		Yellow Brick 2 x 4 x 2 with Rounded Ends with Eyes (a little wonky)
HAS SMALL SCRACHES
1€0.268€4.69Denmark findklodser.dk (471)
Shipping   €4.42
Minimum Order  €6.70
Used
(Good)		Yellow Brick 2 x 4 x 2 with Rounded Ends with Eyes (a little wonky)
HAS SMALL SCRATCHES
1€0.268€4.69Denmark findklodser.dk (471)
Used
(Good)		Yellow Brick 2 x 4 x 2 with Rounded Ends with Eyes (a little wonky)3€0.35 €8.35 Slovenia 3_BRICKS (1477)
Shipping   €8.00
Minimum Order  €10.00
Used
(Good)		Yellow Brick 2 x 4 x 2 with Rounded Ends with Eyes (a little wonky)
quality is a mix of good & acceptable
4€0.411€5.28Germany HenBrixx (342)
Shipping   €4.87
Used
(Acceptable)		Yellow Brick 2 x 4 x 2 with Rounded Ends with Eyes (a little wonky)1€1.50 N/AFrance Rafanny (552)
Request a Shipping Quote
Minimum Order  €4.00
Duplo Yellow Brick 2 x 4 x 2 with Rounded Ends with Eyes (a little wonky) has been used in at least 12 LEGO sets over the past 31 years, since it was first used in 1993. It has a design ID of 81981 which can usually be found molded into the bottom of the part.