LEGO Claw Crusher Set 8101 Inventory
This is the parts inventory for the Claw Crusher Set 8101. It contains 90 parts and 1 minifigure. If you want to buy from this inventory, you can part it out into your wishlist. This inventory may not be 100% complete and should only be used as a guide.
The current cost of the parts in new condition is €37.22 (98% of items). The cost of the parts in used condition is €8.86. In the past, in new condition, the parts have sold for €19.14 (91% of items). In used condition they have sold for €6.92 (98% of items).
The current cost of the parts in new condition is €37.22 (98% of items). The cost of the parts in used condition is €8.86. In the past, in new condition, the parts have sold for €19.14 (91% of items). In used condition they have sold for €6.92 (98% of items).
-
Robot Devastator Exo-Force Minifigure
Qty: 1€1.49
-
Black Angle Connector #4 (135º) (32192 / 42156)
Qty: 2€0.02
-
Orange Animal Tail End Section (40379)
Qty: 3€0.04
-
Black Axle 1.5 with Perpendicular Axle Connector (6553)
Qty: 3€0.01
-
Red Axle 2 with Grooves (32062)
Qty: 4€0.01
-
Medium Stone Gray Axle 3 (4519 / 32240)
Qty: 2€0.01
-
Black Ball Connector with Perpendicular Axleholes and Vents and Side Slots (32174)
Qty: 3€0.01
-
Orange Ball Connector with Perpendicular Axleholes and Vents and Side Slots (32174)
Qty: 2€0.01
-
Black Bracket 2 x 2 - 2 x 2 Up (3956 / 35262)
Qty: 1€0.02
-
Pearl Light Gray Brick 1 x 1 Round with Fins (4588 / 52394)
Qty: 1€0.03
-
Dark Stone Gray Brick 1 x 2 with Axle Hole ('+' Opening and Bottom Tube) (31493 / 32064)
Qty: 4€0.01
-
Black Brick 1 x 4 with 4 Studs on One Side (30414)
Qty: 1€0.03
-
Dark Stone Gray Brick 2 x 2 with Ball Joint and Axlehole with Holes in Ball (57909)
Qty: 3€0.01
-
Dark Stone Gray Brick 2 x 2 with Ball Socket and Axlehole (Wide Reinforced Socket) (62712)
Qty: 2€0.02
-
Dark Stone Gray Brick 2 x 2 with Two Ball Joints without Holes in Ball (57908)
Qty: 2€0.01
-
Black Brick 2 x 2 x 2 Round with Bottom Axle Holder 'x' Shape '+' Orientation (30361)
Qty: 1€0.01
-
Transparent Orange Cone 1 x 1 without Top Groove (4589 / 6188)
Qty: 1€0.01
-
Black Hinge Arm with Two Fingers and Axle Hole (30553)
Qty: 1€0.01
-
Black Hinge Plate 1 x 2 with Vertical Locking Stub with Bottom Groove (44567 / 49716)
Qty: 1€0.01
-
Black Long Pin with Friction and Bushing (32054 / 65304)
Qty: 6€0.01
-
Pearl Light Gray Mechanical Arm with Thin Support (53989 / 58342)
Qty: 3€0.02
-
Black Plate 1 x 1 Round (6141 / 30057)
Qty: 2€0.01
-
Transparent Orange Plate 1 x 1 Round (6141 / 30057)
Qty: 1€0.01
-
Dark Stone Gray Plate 1 x 2 (3023 / 28653)
Qty: 4€0.01
-
Orange Plate 1 x 2 (3023 / 28653)
Qty: 1€0.01
-
Black Plate 1 x 2 with 1 Stud (with Groove) (3794 / 15573)
Qty: 3€0.02
-
Dark Stone Gray Plate 1 x 2 with Handle (Open Ends) (2540)
Qty: 2€0.01
-
Orange Plate 1 x 4 (3710)
Qty: 1€0.01
-
Orange Plate 2 x 2 (3022 / 94148)
Qty: 3€0.01
-
Black Plate 2 x 2 Round with Rounded Bottom (2654 / 28558)
Qty: 1€0.01
-
Orange Plate 2 x 4 (3020)
Qty: 2€0.01
-
Pearl Light Gray Slope 2 x 2 Curved with Curved End (47457)
Qty: 1€0.02
-
Black Space Scanner with Handle (30035)
Qty: 1€0.02
-
Black Technic Plate 2 x 4 with Holes (3709)
Qty: 1€0.01
-
Orange Tile 1 x 2 Grille (with Bottom Groove) (2412 / 30244)
Qty: 3€0.01
-
Orange Tile 1 x 2 with Exo Force Code with Groove (58624 / 58626)
Qty: 1€0.02
-
Black Tile 2 x 2 with Groove (3068 / 88409)
Qty: 1€0.02
-
Black Toa Metru Foot 3 x 7 x 2 (47298)
Qty: 2€0.02
-
Black Wedge 2 x 4 Triple Left (43710)
Qty: 1€0.02
-
Black Wedge 2 x 4 Triple Right (43711)
Qty: 1€0.02
-
Orange Wedge 4 x 3 Curved with 2 x 2 Cutout (47755)
Qty: 1€0.01
-
Black Wedge 4 x 4 Quadruple Convex Slope Center (47757)
Qty: 3€0.01
-
Orange Wedge Belt Wheel (4185 / 49750)
Qty: 2€0.04
-
Black Wedge Plate 3 x 3 Corner (2450)
Qty: 4€0.01
-
Black Wedge Plate 4 x 4 Corner (30503)
Qty: 2€0.01
-
Sticker Sheet for Set 8101 (58512)
Qty: 1€0.56