You are here:

LEGO Red Mudguard Bonnet 3 x 4 x 1.7 Curved with 'PISTON CUP' (70112 / 93587)

Front/wheel Box 3 x 4 x 1.33
More Colors
Design ID70112
Item No's4653582, 6024030
BOID426061-81
Year2012
3 x 4 x 1.67 1.3" x 0.9" x 0.6"
In 3 Wishlists
13 Available from €0.15
Add to Wishlist Buy
Red
Stores
Condition All (10) Used (Like New) (1) Used (Good) (9)
Store Location
Min Quantity
ConditionNameIn StockPricePrice +
Shipping		Store
Used
(Good)		Red Mudguard Bonnet 3 x 4 x 1.7 Curved with 'PISTON CUP'
Good Condition
1€0.154N/AHungary Buy cheap in bulk! (153)
Request a Shipping Quote
Minimum Order  €10.00
Used
(Good)		Red Mudguard Bonnet 3 x 4 x 1.7 Curved with 'PISTON CUP'1€0.162€3.36Slovakia RoyalBrick (103)
Shipping   €3.20
Minimum Order  €5.00
Used
(Good)		Red Mudguard Bonnet 3 x 4 x 1.7 Curved with 'PISTON CUP'1€0.17 N/AGermany HottmeyerBricks (21)
Request a Shipping Quote
Minimum Order  €3.00
Used
(Good)		Red Mudguard Bonnet 3 x 4 x 1.7 Curved with 'PISTON CUP'1€0.191€12.69Germany BrickStore-Lausitz (177)
Shipping   €12.50
Minimum Order  €5.00
Used
(Like New)		Red Mudguard Bonnet 3 x 4 x 1.7 Curved with 'PISTON CUP'1€0.198€6.23Denmark Dk-bricks (1422)
Shipping   €6.03
Minimum Order  €1.34
Used
(Good)		Red Mudguard Bonnet 3 x 4 x 1.7 Curved with 'PISTON CUP'1€0.20 €9.15 France panda brique (169)
Shipping   €8.95
Minimum Order  €10.00
Used
(Good)		Red Mudguard Bonnet 3 x 4 x 1.7 Curved with 'PISTON CUP'
-- scrache
1€0.21 €30.61Thailand DD Bricks (4861)
Shipping   €30.40
Minimum Order  €5.85
Used
(Good)		Red Mudguard Bonnet 3 x 4 x 1.7 Curved with 'PISTON CUP'4€0.258€30.66Thailand DD Bricks (4861)
Shipping   €30.40
Minimum Order  €5.85
Used
(Good)		Red Mudguard Bonnet 3 x 4 x 1.7 Curved with 'PISTON CUP'1€0.26 €8.96 Netherlands Comi-toys (379)
Shipping   €8.70
Used
(Good)		Red Mudguard Bonnet 3 x 4 x 1.7 Curved with 'PISTON CUP'1€0.27 €3.77 Netherlands HollandBricks (2549)
Shipping   €3.50
LEGO Red Mudguard Bonnet 3 x 4 x 1.7 Curved with 'PISTON CUP' has been used in at least 2 LEGO sets over the past 12 years, since it was first used in 2012. It has a design ID of 70112 which can usually be found molded into the bottom of the part.