LEGO Tan Barriss Offee with Cape Head (Recessed Solid Stud) (3626 / 88753)

Minifigure Head
More Colors
Design ID88753
Item No4569531
BOID78414-89
Year2010
1.26 x 1.26 x 1 0.4" x 0.4" x 0.5"
In 13 Wishlists
61 Available from €0.68
Add to Wishlist Buy
Tan
Stores
Condition All (12) New (4) Used (Good) (7) Used (Acceptable) (1)
Store Location
Min Quantity
ConditionNameIn StockPricePrice +
Shipping
Store
Used
(Good)
Tan Barriss Offee with Cape Head1€0.685€3.80Sweden FreddyBricksSWE (78)
Shipping   €3.11
Minimum Order  €2.16
Used
(Acceptable)
Tan Barriss Offee with Cape Head
- marks on left side
1€0.774€8.47Germany Nuernbrick - Nurembrick (0)
Shipping   €7.70
Minimum Order  €4.00
Used
(Good)
Tan Barriss Offee with Cape Head1€0.848€17.35Germany MG Brickz (48)
Shipping   €16.50
Minimum Order  €4.95
Used
(Good)
Tan Barriss Offee with Cape Head1€0.95 €8.65 Netherlands Brick Parts NL (1138)
Shipping   €7.70
Used
(Good)
Tan Barriss Offee with Cape Head1€1.04€31.16Thailand DD Bricks (4847)
Shipping   €30.12
Minimum Order  €5.79
Used
(Good)
Tan Barriss Offee with Cape Head1€1.29€20.11 United States BricksfromColorado (1267)
Shipping   €18.83
Minimum Order  €2.32
Used
(Good)
Tan Barriss Offee with Cape Head1€1.36€20.18 United States BricksfromColorado (1267)
NewTan Barriss Offee with Cape Head1€2.50 €10.49 Denmark Basteq (172)
Shipping   €7.99
Minimum Order  €5.00
NewTan Barriss Offee with Cape Head31€2.90N/ACanada BiteBricks (65)
Request a Shipping Quote
Minimum Order  €8.30
NewTan Barriss Offee with Cape Head1€4.10€28.69Portugal Forever Sorting (299)
Shipping   €24.59
Minimum Order  €122.99
Used
(Good)
Tan Barriss Offee with Cape Head1€5.32€20.21United States Great Brick Lab (3324)
Shipping   €14.89
Minimum Order  €9.61
NewTan Barriss Offee with Cape Head20€6.99€17.13Germany Brick Takeover (6804)
Shipping   €10.14
Minimum Lot Average  €2.15
LEGO Tan Barriss Offee with Cape Head (Recessed Solid Stud) has been used in at least 1 LEGO sets over the past 14 years, since it was first used in 2010. It has a design ID of 88753 which can usually be found molded into the bottom of the part.