LEGO Light Flesh Barret Head (Recessed Solid Stud) (14640)

Minifigure Head
More Colors
Design ID14640
Item No6042626
BOID701781-65
Year2013
1.26 x 1.26 x 1 0.4" x 0.4" x 0.5"
In 26 Wishlists
15 Available from NZ$1.22
Add to Wishlist Buy
Light Flesh
Stores
Condition All (11) New (1) Used (Like New) (3) Used (Good) (7)
Store Location
Min Quantity
ConditionNameIn StockPricePrice +
Shipping
Store
Used
(Like New)
Light Flesh Barret Head
SECOND RATE. ONE OR A FEW SMALL NICKS, LIGHTLY CHEWED NECK, OR MINOR DAMAGE TO DECAL
1NZ$1.22N/ACanada BricksndBobs (300)
Request a Shipping Quote
Used
(Like New)
Light Flesh Barret Head
MINOR DAMAGE. MAY HAVE SMALL DENT OR TWO/ NECK CHEWING ETC.
1NZ$2.44N/ACanada BricksndBobs (300)
Used
(Good)
Light Flesh Barret Head1NZ$2.99NZ$36.51Denmark Dragon Brick Store (184)
Shipping   NZ$33.52
Minimum Order  NZ$35.92
Used
(Like New)
Light Flesh Barret Head1NZ$3.16N/ASweden Bricks by Iggy (152)
Request a Shipping Quote
Minimum Order  NZ$4.97
Used
(Good)
Light Flesh Barret Head
- minor bite mark
1NZ$3.21NZ$22.06Thailand DD Bricks (4867)
Shipping   NZ$18.85
Minimum Order  NZ$8.57
Used
(Good)
Light Flesh Barret Head1NZ$3.57NZ$30.35Germany FamilieBrick (78)
Shipping   NZ$26.78
Used
(Good)
Light Flesh Barret Head1NZ$3.87NZ$30.70United States POMACS Curios (33)
Shipping   ~NZ$26.82
Used
(Good)
Light Flesh Barret Head
couple of slight marks on side barely noticeable. print perfect
1NZ$4.19NZ$15.55United Kingdom Jels Bricks And Pieces (1467)
Shipping   NZ$11.36
Used
(Good)
Light Flesh Barret Head1NZ$4.46N/AUnited States GanoraBricks (73)
Request a Shipping Quote
Minimum Order  NZ$8.57
NewLight Flesh Barret Head5NZ$5.55N/AGermany GetStones24 (2298)
Request a Shipping Quote
Minimum Order  NZ$17.86
Used
(Good)
Light Flesh Barret Head1NZ$14.28NZ$36.32 United States Great Brick Lab (3342)
Shipping   NZ$22.04
Minimum Order  NZ$14.22
LEGO Light Flesh Barret Head (Recessed Solid Stud) has been used in at least 1 LEGO sets over the past 11 years, since it was first used in 2013. It has a design ID of 14640 which can usually be found molded into the bottom of the part.