LEGO Light Gray Hinge Plate 2 x 4 Legs (3149)

Plate 2 x 4 Hinge Legs
More Colors
Design ID3149
Item No314902
BOID844041-66
Year1969 - 1978
4 x 2 x 0.33 1.5" x 0.6" x 0.3"
In 1 Wishlist
15 Available from NZ$0.10
Add to Wishlist Buy
Light Gray
Stores
Store Location
Min Quantity
ConditionNameIn StockPricePrice +
Shipping
Store
Used
(Good)
Light Gray Hinge Plate 2 x 4 Legs2NZ$0.099NZ$17.34Spain BrickPhaisan (247)
Shipping   NZ$17.25
Minimum Order  NZ$1.80
Used
(Good)
Light Gray Hinge Plate 2 x 4 Legs
Larger hole variant below studs
1NZ$0.113NZ$26.32United States 0 Brick Slayer 80... (560)
Shipping   NZ$26.21
Used
(Good)
Light Gray Hinge Plate 2 x 4 Legs1NZ$0.151NZ$14.52Germany Steinchendealer (1676)
Shipping   NZ$14.37
Minimum Order  NZ$1.51
Used
(Good)
Light Gray Hinge Plate 2 x 4 Legs
2nd quality: yellow
1NZ$0.185NZ$12.76 Germany Brick-Emsland (447)
Shipping   NZ$12.58
Minimum Order  NZ$17.96
Used
(Good)
Light Gray Hinge Plate 2 x 4 Legs1NZ$0.226N/AUnited States Just A Brick In The... (386)
Request a Shipping Quote
Minimum Order  NZ$8.54
Used
(Good)
Light Gray Hinge Plate 2 x 4 Legs2NZ$0.226NZ$7.61Hungary Block of Flats (291)
Shipping   NZ$7.39
Minimum Order  NZ$2.19
Used
(Good)
Light Gray Hinge Plate 2 x 4 Legs1NZ$0.264NZ$18.05Germany Brick_Base (420)
Shipping   NZ$17.78
Used
(Good)
Light Gray Hinge Plate 2 x 4 Legs1NZ$0.318N/AUnited States Knock Your Block Off (736)
Request a Shipping Quote
Minimum Order  NZ$17.09
Used
(Good)
Light Gray Hinge Plate 2 x 4 Legs1NZ$0.449NZ$17.16Italy BizzBricks (937)
Shipping   NZ$16.71
Minimum Order  NZ$35.93
Used
(Good)
Light Gray Hinge Plate 2 x 4 Legs1NZ$0.715NZ$19.58Germany MoreThanBricks (147)
Shipping   NZ$18.86
Minimum Lot Average  NZ$1.51
Used
(Good)
Light Gray Hinge Plate 2 x 4 Legs3NZ$0.754NZ$17.56Australia SYDNEY BRICK EMPORIUM (340)
Shipping   NZ$16.81
Minimum Order  NZ$11.09
LEGO Light Gray Hinge Plate 2 x 4 Legs has been used in at least 4 LEGO sets over the past 55 years, since it was first used in 1969. You can also find this part in at least 7 other colors. It has a design ID of 3149 which can usually be found molded into the bottom of the part.