LEGO Medium Stone Gray Standard Cape with Standard Fabric (20458 / 50231)

Mantle for Minifigure Figure
More Colors
Design ID50231
Item No's4226857, 4549632
BOID411487-64
Year2004 - 2009
1.6" x 1.6" x 0"
In 102 Wishlists
12 Available from NZ$17.74
Add to Wishlist Buy

Cape length may vary by 1mm

Medium Stone Gray
Stores
Condition All (10) New (1) Used (Good) (8) Used (Acceptable) (1)
Store Location
Min Quantity
ConditionNameIn StockPricePrice +
Shipping
Store
Used
(Acceptable)
Medium Stone Gray Standard Cape1NZ$17.77N/AGermany ma.la.bricks (0)
Request a Shipping Quote
Used
(Good)
Medium Stone Gray Standard Cape
Good Condition, Minor fraying on edges and /or a little cleaning needed 8/10
1NZ$20.59NZ$34.13Australia Bricktastics (314)
Shipping   NZ$13.54
Used
(Good)
Medium Stone Gray Standard Cape2NZ$22.63 NZ$43.27Germany Basic Bricks Bavaria (599)
Shipping   NZ$20.64
Used
(Good)
Medium Stone Gray Standard Cape
Good condition
1NZ$23.02NZ$39.19Slovenia Brick Freaks (33)
Shipping   NZ$16.17
Used
(Good)
Medium Stone Gray Standard Cape
Some Fray and discolouration
1NZ$25.34NZ$45.31Australia Farrout Bricks (10)
Shipping   NZ$19.97
Used
(Good)
Medium Stone Gray Standard Cape1NZ$26.05NZ$40.87 Netherlands BSL Bricks (839)
Shipping   NZ$14.82
Minimum Lot Average  NZ$0.90
Used
(Good)
Medium Stone Gray Standard Cape
AS BRAND NEW CONDITION
2NZ$27.74NZ$58.25Australia Leftover Bricks & Pieces (18)
Shipping   NZ$30.51
Used
(Good)
Medium Stone Gray Standard Cape
has a stain on, no freying or thred damaged
1NZ$29.92NZ$51.90United States Great Brick Lab (3343)
Shipping   NZ$21.97
Used
(Good)
Medium Stone Gray Standard Cape1NZ$32.46N/AUnited States Adam's Brick Shop (200)
Request a Shipping Quote
NewMedium Stone Gray Standard Cape1NZ$54.16NZ$70.33Belgium MDSbrick_belgium (125)
Shipping   NZ$16.17
Cape length may vary by 1mm. LEGO Medium Stone Gray Standard Cape with Standard Fabric has been used in at least 6 LEGO sets over the past 20 years, since it was first used in 2004. You can also find this part in at least 43 other colors. It has a design ID of 50231 which can usually be found molded into the bottom of the part.