LEGO Mini Slave I Set CELEBVI Inventory
This is the parts inventory for the Mini Slave I Set CELEBVI. It contains 77 parts and 1 minifigure. If you want to buy from this inventory, you can part it out into your wishlist. This inventory may not be 100% complete and should only be used as a guide.
The current cost of the parts in new condition is NZ$102.07. The cost of the parts in used condition is NZ$40.88. In the past, in new condition, the parts have sold for NZ$104.35. In used condition they have sold for NZ$34.73.
The current cost of the parts in new condition is NZ$102.07. The cost of the parts in used condition is NZ$40.88. In the past, in new condition, the parts have sold for NZ$104.35. In used condition they have sold for NZ$34.73.
-
Boba Fett with Balaclava Head Minifigure
Qty: 1NZ$14.25
-
Medium Stone Gray Bracket 1 x 2 - 1 x 2 (99781)
Qty: 2NZ$0.02
-
Medium Stone Gray Bracket 1 x 2 - 2 x 2 Up (99207)
Qty: 4NZ$0.01
-
Dark Stone Gray Bracket 1 x 2 with 2 x 2 (21712 / 44728)
Qty: 1NZ$0.01
-
Medium Stone Gray Brick 1 x 2 with Hole (3700)
Qty: 3NZ$0.02
-
Dark Green Brick 2 x 2 (3003 / 6223)
Qty: 1NZ$0.05
-
Dark Green Brick 2 x 2 Facet (87620)
Qty: 4NZ$0.19
-
Medium Stone Gray Brick 2 x 2 Round Corner with Stud Notch and Reinforced Underside (85080)
Qty: 2NZ$0.04
-
Medium Stone Gray Brick 2 x 3 (3002)
Qty: 1NZ$0.02
-
Black Cone 1 x 1 with Top Groove (28701 / 59900)
Qty: 4NZ$0.02
-
Medium Stone Gray Hinge Arm with Two Fingers and Axle Hole (30553)
Qty: 2NZ$0.02
-
Medium Stone Gray Hinge Plate 1 x 2 Locking with Single Finger On Top (30383 / 53922)
Qty: 2NZ$0.04
-
Medium Stone Gray Panel 1 x 4 with Rounded Corners (30413 / 43337)
Qty: 2NZ$0.04
-
Medium Stone Gray Pin Joiner Round with Slot (29219 / 62462)
Qty: 2NZ$0.02
-
Tan Pin with Axle Connector (3749 / 6562)
Qty: 2NZ$0.01
-
Dark Stone Gray Plate 1 x 2 (3023 / 28653)
Qty: 3NZ$0.02
-
Medium Stone Gray Plate 1 x 2 with Horizontal Clips (Open 'O' Clips) (49563 / 60470)
Qty: 1NZ$0.01
-
Red Plate 1 x 4 (3710)
Qty: 3NZ$0.02
-
Dark Red Plate 1 x 6 (3666)
Qty: 2NZ$0.02
-
Medium Stone Gray Plate 2 x 2 Round with Axle Hole (with '+' Axle Hole) (4032)
Qty: 3NZ$0.01
-
Medium Stone Gray Plate 2 x 2 with Groove and 1 Center Stud (23893 / 87580)
Qty: 3NZ$0.02
-
Dark Stone Gray Plate 2 x 3 with Rounded End and Pin Hole (3176)
Qty: 1NZ$0.01
-
Dark Stone Gray Plate 2 x 4 (3020)
Qty: 2NZ$0.02
-
Red Plate 2 x 6 (3795)
Qty: 2NZ$0.02
-
Tan Plate 3 x 3 Round Corner (30357)
Qty: 2NZ$0.02
-
Dark Stone Gray Plate 4 x 4 Round with Hole and Snapstud (60474)
Qty: 1NZ$0.02
-
Dark Stone Gray Plate 4 x 8 (3035)
Qty: 1NZ$0.09
-
Medium Stone Gray Slope 1 x 2 x 1.3 Curved with Plate (6091 / 32807)
Qty: 2NZ$0.02
-
Medium Stone Gray Slope 2 x 3 (25°) Inverted with Connections between Studs (2752 / 3747)
Qty: 2NZ$0.02
-
Black Technic Pin Joiner Plate 1 x 2 x 1 & 1/2 (32529)
Qty: 2NZ$0.01
-
Black Technic Pin with Short Friction Ridges (2780 / 61332)
Qty: 2NZ$0.01
-
Medium Stone Gray Tile 1 x 6 (6636)
Qty: 1NZ$0.04
-
Black Tile 2 x 2 with Vertical Pin (2460 / 49153)
Qty: 2NZ$0.01
-
Red Tile 2 x 4 (87079)
Qty: 1NZ$0.06
-
Dark Red Wedge 2 x 4 Triple (47759)
Qty: 1NZ$0.09
-
Dark Red Wedge 2 x 4 Triple Left (43710)
Qty: 1NZ$0.04
-
Dark Red Wedge 2 x 4 Triple Right (43711)
Qty: 1NZ$0.05
-
Dark Stone Gray Wedge Plate 2 x 4 (51739)
Qty: 1NZ$0.01
-
Dark Red Wedge Plate 3 x 3 Corner (2450)
Qty: 2NZ$0.02
-
Dark Red Wedge Plate 3 x 6 Wing Left (54384)
Qty: 1NZ$0.04
-
Dark Red Wedge Plate 3 x 6 Wing Right (54383)
Qty: 1NZ$0.06
-
Transparent Windscreen 2 x 5 x 2 with Handle (35375 / 92474)
Qty: 1NZ$0.01