LEGO Pearl Light Gray Helmet with Rocket Pack for Boba Fett with Jango Fett Colors (30380 / 42162)

Boba Fett Helmet jango Fett
More Colors
Design ID42162
Item No4162820
BOID495159-122
Year2002
0.8" x 0.7" x 1"
In 12 Wishlists
7 Available from NZ$164.89
Add to Wishlist Buy
Pearl Light Gray
Stores
Condition All (7) Used (Good) (6) Used (Acceptable) (1)
Store Location
Min Quantity
ConditionNameIn StockPricePrice +
Shipping
Store
Used
(Good)
Pearl Light Gray Helmet with Rocket Pack for Boba Fett with Jango Fett Colors
Slight missprint on the blue
1NZ$164.89NZ$186.52Sweden Bricks in Sweden (204)
Shipping   NZ$21.63
Used
(Good)
Pearl Light Gray Helmet with Rocket Pack for Boba Fett with Jango Fett Colors
VERY SLIGHTLY YELLOWED ON LEFT TOP
1NZ$170.64 N/AUnited States Coffee.Bricks (412)
Request a Shipping Quote
Used
(Good)
Pearl Light Gray Helmet with Rocket Pack for Boba Fett with Jango Fett Colors
Pictures available upon request. No dings or indentions. Some paint wear. Torso is also available in store.
1NZ$201.84NZ$237.16United States Memories By The Brick (561)
Shipping   NZ$35.32
Used
(Acceptable)
Pearl Light Gray Helmet with Rocket Pack for Boba Fett with Jango Fett Colors
a little bit of color is missing on the edge of the helmet
1NZ$204.98NZ$224.63Slovenia 3_BRICKS (1471)
Shipping   NZ$19.65
Used
(Good)
Pearl Light Gray Helmet with Rocket Pack for Boba Fett with Jango Fett Colors
print very slightly worn
1NZ$210.15NZ$227.34 Switzerland The Briqary (286)
Shipping   NZ$17.19
Used
(Good)
Pearl Light Gray Helmet with Rocket Pack for Boba Fett with Jango Fett Colors
Small amount of print rubbed off at nose gap, otherwise fantastic condition
1NZ$277.01NZ$296.11Switzerland SwissBrickBank (171)
Shipping   NZ$19.10
Used
(Good)
Pearl Light Gray Helmet with Rocket Pack for Boba Fett with Jango Fett Colors1NZ$822.70NZ$844.33United States Great Brick Lab (3324)
Shipping   NZ$21.63
LEGO Pearl Light Gray Helmet with Rocket Pack for Boba Fett with Jango Fett Colors has been used in at least 1 LEGO sets over the past 22 years, since it was first used in 2002. It has a design ID of 42162 which can usually be found molded into the bottom of the part.