LEGO Black Blade End with Sawteeth and Vents (57528)

Weapon 11 2007
More Colors
Design ID57528
Item No4542386
BOID450970-38
Year2009
1.8" x 2.8" x 0.3"
In 24 Wishlists
13 Available from S$ 0.72
Add to Wishlist Buy
Black
Stores
Condition All (11) Used (Like New) (2) Used (Good) (9)
Store Location
Min Quantity
ConditionNameIn StockPricePrice +
Shipping
Store
Used
(Good)
Black Blade End with Sawteeth and Vents1S$ 0.723S$ 14.75Germany Brick_Base (413)
Shipping   S$ 14.03
Used
(Like New)
Black Blade End with Sawteeth and Vents1S$ 0.901S$ 13.20Netherlands Bricks by Nicks (83)
Shipping   S$ 12.30
Used
(Good)
Black Blade End with Sawteeth and Vents2S$ 0.926N/ACzech Republic DeersBrickscz (0)
Request a Shipping Quote
Minimum Order  S$ 14.01
Used
(Good)
Black Blade End with Sawteeth and Vents1S$ 1.01N/AFinland Savo Bricks (55)
Request a Shipping Quote
Minimum Order  S$ 3.39
Used
(Good)
Black Blade End with Sawteeth and Vents1S$ 1.02S$ 9.37United Kingdom Minithingsforlife (3599)
Shipping   S$ 8.35
Minimum Order  S$ 1.70
Used
(Good)
Black Blade End with Sawteeth and Vents1S$ 1.09 N/AUnited Kingdom Thames Bricks (522)
Request a Shipping Quote
Minimum Order  S$ 2.56
Used
(Like New)
Black Blade End with Sawteeth and Vents1S$ 1.13S$ 8.93Slovakia RN-Bricks (1)
Shipping   S$ 7.79
Used
(Good)
Black Blade End with Sawteeth and Vents1S$ 1.23N/ACanada BricksBC (350)
Request a Shipping Quote
Minimum Order  S$ 6.73
Used
(Good)
Black Blade End with Sawteeth and Vents1S$ 1.24S$ 17.64Australia SYDNEY BRICK EMPORIUM (331)
Shipping   S$ 16.40
Minimum Order  S$ 8.70
Used
(Good)
Black Blade End with Sawteeth and Vents1S$ 1.31N/AUnited Kingdom DB Bricks (1019)
Request a Shipping Quote
Minimum Order  S$ 1.70
Used
(Good)
Black Blade End with Sawteeth and Vents2S$ 1.42S$ 9.92 Netherlands Brickmarkt (422)
Shipping   S$ 8.50
LEGO Black Blade End with Sawteeth and Vents has been used in at least 1 LEGO sets over the past 15 years, since it was first used in 2009. You can also find this part in at least 5 other colors. It has a design ID of 57528 which can usually be found molded into the bottom of the part.