LEGO Inferno Squad Battle Pack Set 75226 Inventory
This is the parts inventory for the Inferno Squad Battle Pack Set 75226. It contains 101 parts and 4 minifigures. If you want to buy from this inventory, you can part it out into your wishlist. This inventory may not be 100% complete and should only be used as a guide.
The current cost of the parts in new condition is S$ 114.34. The cost of the parts in used condition is S$ 62.10. In the past, in new condition, the parts have sold for S$ 70.08. In used condition they have sold for S$ 48.44.
The current cost of the parts in new condition is S$ 114.34. The cost of the parts in used condition is S$ 62.10. In the past, in new condition, the parts have sold for S$ 70.08. In used condition they have sold for S$ 48.44.
-
Iden Versio Minifigure
Qty: 1S$ 9.12
-
Inferno Squad Agent with Frown Minifigure
Qty: 1S$ 3.91
-
Inferno Squad Agent with Grimace Minifigure
Qty: 1S$ 4.15
-
Inferno Squad Agent with Utility Belt Minifigure
Qty: 1S$ 4.96
-
Black Angle Connector #3 (157.5º) (32016 / 42128)
Qty: 2S$ 0.04
-
Red Axle 2 with Grooves (32062)
Qty: 3S$ 0.01
-
Black Bar 6 with Thick Stop (28921 / 63965)
Qty: 2S$ 0.03
-
Medium Stone Gray Bracket 1 x 2 with 1 x 2 Up (99780)
Qty: 4S$ 0.02
-
Black Bracket 2 x 5 x 1.3 with Holes (11215 / 79180)
Qty: 1S$ 0.01
-
Dark Stone Gray Brick 1 x 2 with 2 Holes (32000)
Qty: 4S$ 0.01
-
Black Brick 1 x 2 x 0.7 with Studs on Sides and Bar (15071)
Qty: 1S$ 0.03
-
Black Cone 1 x 1 with Top Groove (28701 / 59900)
Qty: 4S$ 0.01
-
Blue Half Pin with Stud (4274)
Qty: 2 + 1S$ 0.01
-
Black Hinge Arm Locking with Single Finger and Friction Pin (41532 / 57697)
Qty: 2S$ 0.01
-
Black Hinge Arm with Two Fingers and Axle Hole (30553)
Qty: 2S$ 0.01
-
Medium Stone Gray Hinge Plate 1 x 2 Locking with Single Finger On Top (30383 / 53922)
Qty: 2S$ 0.02
-
Black Hinge Plate 1 x 2 with Locking Fingers with Groove (44302)
Qty: 2S$ 0.01
-
Blue Long Pin with Friction (6558 / 42924)
Qty: 2S$ 0.01
-
Black Loudhailer (4349)
Qty: 1S$ 0.01
-
Black Mini Shooting Gun (15391)
Qty: 3S$ 0.01
-
Transparent Red Plate 1 x 1 Round (6141 / 30057)
Qty: 14 + 1S$ 0.01
-
Transparent Brown Black Plate 1 x 2 (3023 / 28653)
Qty: 2S$ 0.02
-
Black Plate 1 x 2 with 1 Stud (with Groove and Bottom Stud Holder) (15573 / 78823)
Qty: 4S$ 0.01
-
Dark Stone Gray Plate 1 x 2 with End Bar Handle (60478)
Qty: 2S$ 0.01
-
Black Plate 1 x 2 with Shooter (15403)
Qty: 3S$ 0.01
-
Black Plate 1 x 2 with Top Clip with Gap (92280)
Qty: 2S$ 0.01
-
Black Plate 1 x 4 (3710)
Qty: 1S$ 0.01
-
Red Plate 2 x 2 Round with Axle Hole (with '+' Axle Hole) (4032)
Qty: 4S$ 0.01
-
Red Plate 2 x 3 (3021)
Qty: 1S$ 0.01
-
Medium Stone Gray Plate 2 x 8 (3034)
Qty: 1S$ 0.03
-
Dark Stone Gray Slope 1 x 2 (45°) with Plate (15672 / 92946)
Qty: 3S$ 0.01
-
Medium Stone Gray Slope 1 x 2 Curved (3593 / 11477)
Qty: 4S$ 0.01
-
Medium Stone Gray Slope 1 x 3 Curved (50950)
Qty: 1S$ 0.03
-
Medium Stone Gray Slope 1 x 4 Curved Double (93273)
Qty: 2S$ 0.03
-
Black Tap 1 x 1 with Hole in End (4599)
Qty: 1S$ 0.03
-
Dark Stone Gray Technic Plate 2 x 4 with Holes (3709)
Qty: 3S$ 0.01
-
Black Telescope (64644)
Qty: 1S$ 0.03
-
Dark Stone Gray Tile 1 x 2 Grille (with Bottom Groove) (2412 / 30244)
Qty: 1S$ 0.01
-
Dark Stone Gray Tile 1 x 2 with Handle (2432)
Qty: 1S$ 0.01
-
Transparent Light Blue Tile 1 x 4 (2431 / 35371)
Qty: 1S$ 0.02
-
Dark Stone Gray Tile 2 x 2 with Groove (3068 / 88409)
Qty: 1S$ 0.04
-
Dark Stone Gray Trigger for Mini Shooting Gun (15392)
Qty: 6 + 1S$ 0.01
-
Red Wedge Plate 2 x 4 Wing Left (41770)
Qty: 1S$ 0.02
-
Red Wedge Plate 2 x 4 Wing Right (41769)
Qty: 1S$ 0.02
-
Dark Stone Gray Wedge Plate 3 x 3 Corner (2450)
Qty: 2S$ 0.01
-
Medium Stone Gray Wedge Plate 3 x 4 with Stud Notches (28842 / 48183)
Qty: 1S$ 0.02