You are here:

LEGO Medium Stone Gray Leg Armor with Ball Joint with Orange and Buttons (21562 / 36050)

Leg Shell with Ball Pin
More Colors
Design ID36050
Item No6209948
BOID130350-64
Year2018
8 x 3 x 3 2.5" x 0.9" x 0.9"
In 6 Wishlists
15 Available from S$ 0.72
Add to Wishlist Buy
Medium Stone Gray
Stores
Condition All (9) New (3) Used (Good) (6)
Store Location
Min Quantity
ConditionNameIn StockPricePrice +
Shipping		Store
Used
(Good)		Medium Stone Gray Leg Armor with Ball Joint with Orange and Buttons1S$ 0.723S$ 36.73Germany Stein.Meister (49)
Shipping   S$ 36.01
NewMedium Stone Gray Leg Armor with Ball Joint with Orange and Buttons1S$ 0.772S$ 12.29Germany Steinchendealer (1600)
Shipping   S$ 11.52
Minimum Order  S$ 1.21
Used
(Good)		Medium Stone Gray Leg Armor with Ball Joint with Orange and Buttons1S$ 0.794S$ 7.15Sweden Vintage Brickworks (399)
Shipping   S$ 6.35
Minimum Order  S$ 6.35
Used
(Good)		Medium Stone Gray Leg Armor with Ball Joint with Orange and Buttons5S$ 0.906S$ 30.68Thailand DD Bricks (4721)
Shipping   S$ 29.78
Minimum Order  S$ 6.47
Used
(Good)		Medium Stone Gray Leg Armor with Ball Joint with Orange and Buttons1S$ 0.943N/AUnited Kingdom Teeza999bricks (116)
Request a Shipping Quote
NewMedium Stone Gray Leg Armor with Ball Joint with Orange and Buttons1S$ 0.946S$ 18.95 Germany Brick 'N' Roll (410)
Shipping   S$ 18.00
Minimum Order  S$ 4.32
Used
(Good)		Medium Stone Gray Leg Armor with Ball Joint with Orange and Buttons1S$ 0.992N/AGermany MWB-Minifiguren (100)
Request a Shipping Quote
Minimum Order  S$ 7.20
NewMedium Stone Gray Leg Armor with Ball Joint with Orange and Buttons3S$ 1.35S$ 38.80Belgium Timby's Cellar (1439)
Shipping   S$ 37.45
Minimum Order  S$ 1.44
Used
(Good)		Medium Stone Gray Leg Armor with Ball Joint with Orange and Buttons1S$ 4.52N/AUnited States Just Brickin Fun (308)
Request a Shipping Quote
LEGO Medium Stone Gray Leg Armor with Ball Joint with Orange and Buttons has been used in at least 1 LEGO sets over the past 6 years, since it was first used in 2018. It has a design ID of 36050 which can usually be found molded into the bottom of the part.