LEGO Medium Stone Gray Standard Cape with Standard Fabric (20458 / 50231)

Mantle for Minifigure Figure
More Colors
Design ID50231
Item No's4226857, 4549632
BOID411487-64
Year2004 - 2009
1.6" x 1.6" x 0"
In 102 Wishlists
12 Available from S$ 13.98
Add to Wishlist Buy

Cape length may vary by 1mm

Medium Stone Gray
Stores
Condition All (10) New (1) Used (Good) (8) Used (Acceptable) (1)
Store Location
Min Quantity
ConditionNameIn StockPricePrice +
Shipping
Store
Used
(Acceptable)
Medium Stone Gray Standard Cape1S$ 14.00N/AGermany ma.la.bricks (0)
Request a Shipping Quote
Used
(Good)
Medium Stone Gray Standard Cape
Good Condition, Minor fraying on edges and /or a little cleaning needed 8/10
1S$ 16.23S$ 30.04Australia Bricktastics (314)
Shipping   S$ 13.81
Used
(Good)
Medium Stone Gray Standard Cape2S$ 17.83S$ 33.39Germany Basic Bricks Bavaria (599)
Shipping   S$ 15.56
Used
(Good)
Medium Stone Gray Standard Cape
Good condition
1S$ 18.14N/ASlovenia Brick Freaks (33)
Request a Shipping Quote
Used
(Good)
Medium Stone Gray Standard Cape
Some Fray and discolouration
1S$ 19.97S$ 45.32Australia Farrout Bricks (10)
Shipping   S$ 25.35
Used
(Good)
Medium Stone Gray Standard Cape1S$ 20.53S$ 32.20Netherlands BSL Bricks (839)
Shipping   S$ 11.68
Minimum Lot Average  S$ 0.71
Used
(Good)
Medium Stone Gray Standard Cape
AS BRAND NEW CONDITION
2S$ 21.86S$ 45.90Australia Leftover Bricks & Pieces (18)
Shipping   S$ 24.04
Used
(Good)
Medium Stone Gray Standard Cape
has a stain on, no freying or thred damaged
1S$ 23.58S$ 40.89United States Great Brick Lab (3343)
Shipping   S$ 17.31
Used
(Good)
Medium Stone Gray Standard Cape1S$ 25.58N/AUnited States Adam's Brick Shop (200)
Request a Shipping Quote
NewMedium Stone Gray Standard Cape1S$ 42.68S$ 55.42Belgium MDSbrick_belgium (125)
Shipping   S$ 12.74
Cape length may vary by 1mm. LEGO Medium Stone Gray Standard Cape with Standard Fabric has been used in at least 6 LEGO sets over the past 20 years, since it was first used in 2004. You can also find this part in at least 43 other colors. It has a design ID of 50231 which can usually be found molded into the bottom of the part.